Telescopic Portable FlagpoleOur aluminum portable telescopic flagpoles offer you the option of displaying your own flag anywhere and come complete with a top arm, U-base or tow-ball mount. The standard size 1800mm x 900mm vertical flag is usually used with this flagpole and is fitted with a sleeve and loops for easy attachment. If a vehicle is not available as an anchoring point there are alternative mounting options. Optional extras include ground pegs to anchor the U-base, carry bags and spare parts.
 
Auction Flags
Auction Flags are available printed in bright red and white to read either horizontally or vertically. These are available printed on polyester knit fabric in the standard size of 1800mm x 900mm and can be fitted with rope and toggle, sister clips or sleeves and loops to suit individual requirements. 
Open Home Flags
Open Home Flags are available printed in either bright red and white or bright blue and white, to read with horizontally or vertically. These are available printed on polyester knit fabric in the standard size of 1800mm x 900mm and can be fitted with rope and toggle, sister clips or sleeves and loops to suit individual requirements.
Wind BladesWind Blades are an eye-catching addition to our Real Estate flag range. They catch the gentlest breeze creating movement and are easily portable with a range of mounting options to suit any location. We have "AUCTION", "OPEN HOME" and "SALE" stock Wind Blades available in white on blue or white on red in both large and small sizes or contact us to create your own design.
Large Wind Blades
Each Unit presented in a durable carry bag for ease of transport consists of:
Pole: 1 x 4 metre telescopic fiberglass pole Flag: 700mm x 3100mm, printed on polyester knit fabric Mount: 1 x ground spike with spindle or waterbase.
Small Wind Blades
The Small Wind Blade is also presented in a durable carry bag for ease of transport and consists of: Pole: 1 x 3 metre telescopic fiberglass pole Flag: 690mm x 2200mm, printed on polyester knit fabric Mount: 1 x ground spike with spindle or waterbase. 
Telescopic Flag Pole Operating Instructions
Extending Pole Extend the three sections by gently turning each section anti- clockwise. Pull out to full length, tightening each section clockwise. Placing the Flag onto the Pole Slide loops of the vertical flag onto the telescopic pole. Then slide the flag sleeve onto the top arm before joining the telescopic pole and the top arm together. Attaching the Top Arm Attach the top arm with the black cap end onto the top of the telescopic pole. Finally fit the base of the pole onto the mounting. CAUTION: This product is not designed to fly in winds exceeding 35KPH Windblade Operating Instructions Extending Pole Remove the rubber end cap and extend each section fully, then twist gently at each section join to secure in place. Do not over tighten. Fitting Flag to Wind Blade Slide the tip of the extended pole into the webbing ensuring the tip goes right to the end. Hook the rubber o’ring over the cleat on the pole. The Wind Blade is now ready to mount onto the ground spike or water base spindle. Removing Pole from the Ground Remove the flagpole carefully from the ground spike, then remove spike from the ground if need be. Very Important Do not use the pole as a lever to remove spike from the ground. We cannot accept warranty claims for poles that are damaged in this manner. Unlocking Pole Sections To unlock the sections of the pole, hold each section and push gently towards each other. TAKE NOTE: Please do not place any heavy objects on top of these poles when being transported. CAUTION: This product is not designed to fly in winds exceeding 35KPH |
HOME
WIND BLADES
CORPORATE FLAGS
DIGITAL PRINTING
SPECIALS
BANNERS
FLAG POLES
NATIONAL & 
